Additions to our products and the introduction of Neopor 
The baseline thermal conductivity of traditional EPS (expanded polystyrene), commonly known as styrofoam as in styrofoam cup, is 0,035. With Neopor this is improved to 0,031.
Blocks still available in EPS are:
- 0001
- 0601 und 0604
- Styro Stone floor infill blocks
- 6501 roof plate blocks
There are advantages to using a combination of traditional EPS and Neopor:
External walls, where thermal efficiency is important, can be built using Neopor.
Internal load bearing walls can use the cheaper EPS blocks, as improved thermal insulation of Neopor is not strictly necessary here. Table of U values, attainable using a combination of traditional EPS and Neopor, incorporating the VIB-Stone :
25 cm Styro foam: 0,29
25 cm Neopor : 0,25
35 cm Neopor: 0,14
40 cm Neopor: 0,118
45 cm Neopor: 0,099
50 cm Neopor: 0,086
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}